-
Coil Gapping Tool
Take the guesswork out of setting your ignition coil gap with this little beauty! Our coil gapping tool will aid you in properly setting your ignition coil gap to precisely .020".
APPLICATION » All flywheels and engines$9.95SKU: rsp_13_061 VIEW ITEM DETAILS -
Ignition Timing Kit
WHERE IS MY ENGINE TIMING SET?
A question most people can't answer without rigging a degree wheel and timing needle up to their motor! We solved this by developing the stage 2 timing kit which turns your Rev Wheel into a degree wheel! The beauty behind this kit is its ease of installation and use. Easily adjust and set engine timing by using the piston dead stop and timing needle to set top dead center. Then spin the motor with a drill and hold a timing light at the timing needle to read your timing on the timing sticker. To retard or advance your timing, loosen the coil bracket bolts which are accessible through the front of the rev wheel and rotate your coil bracket. Tighten the bolts and your off to the races!$42.00SKU: rsp_16_063 VIEW ITEM DETAILS -
Piston Dead Stop
A must have for anyone assembling and building engines. Our billet aluminum piston dead stop can be used with any motor with a 14mm spark plug. The piston dead stop screws into the spark plug hole and aids in finding true top dead center with a degree wheel. It is also an essential tool for torquing and removing a flywheel nut.
$25.00SKU: rsp_13_225 VIEW ITEM DETAILS -
Rev Wheel - Finned
A NEW BREED OF HIGH PERFORMANCE BILLET FLYWHEELS!
This small diameter SFI certified finned Rev Wheel weighs in at 2.27 lbs. and features a rare earth neodymium magnet that throws a spark 100% hotter then a stock flywheel. The Rev Wheel comes with a coil relocation bracket that allows you to adjust your ignition timing with ease. Turn your ordinary 340/390 Honda GX or Clone engine into a RPM grabbing monster!$215.00SKU: rsp_16_061 VIEW ITEM DETAILS -
Rev Wheel - Non-finned
A NEW BREED OF HIGH PERFORMANCE BILLET FLYWHEELS!
This small diameter SFI certified fin-less Rev Wheel weighs in at 2 lbs. and features a rare earth neodymium magnet that throws a spark 100% hotter then a stock flywheel. The Rev Wheel comes with a coil relocation bracket that allows you to adjust your engine timing with ease. This is the ultimate lightweight flywheel, get on the throttle with this bolted on your motor and prepare for instant RPMs and acceleration!$195.00SKU: rsp_16_060 VIEW ITEM DETAILS -
Rev Wheel Puller
Stop pounding your crank and using screw drivers to get your flywheels off! This slick billet aluminum flywheel puller screws into the front of our Rev Wheel and aids in easily removing the flywheels.
APPLICATION » Works with all 160/200 and 340/390 Rev WheelsSKU: rsp_13_080 VIEW ITEM DETAILSRegular Price: $25.00
Special Price: $20.00
-
Timing Tape
Replacement timing tape for Raceseng Rev Wheels.
APPLICATION » 160/200/340/390 Honda GX and Clone Engines$10.00SKU: rsp_13_059 VIEW ITEM DETAILS
