- Category
-
REV ROCKER - S1 - 1.1 RATIOThe next generation in Raceseng Rev Rockers! Our new S1 rocker arms are the only true shaft mounted billet aluminum non-roller rocker arms on the market. They feature a arched steel tip which simulates the effect of a roller tip except it does not spin. The rocker geometry is designed to minimize movement on the valve and maintain minimum rocker mass with the industry's lowest moment of inertia.
The S1 Rev Rocker bodies are machined from USA extruded 7075 aluminum and mounted on a precision ground 1/2" diameter shaft. The use of this material in conjunction with the shaft provides for an extremely lightweight yet rigid rocker arm.
Rocker arm ratio - 1.1
$149.00SKU: rsp_13_032 VIEW ITEM DETAILS -
REV ROCKER - S1 - 1.2 RATIOThe next generation in Raceseng Rev Rockers! Our new S1 rocker arms are the only true shaft mounted billet aluminum non-roller rocker arms on the market. They feature a arched steel tip which simulates the effect of a roller tip except it does not spin. The rocker geometry is designed to minimize movement on the valve and maintain minimum rocker mass with the industry's lowest moment of inertia.
The S1 Rev Rocker bodies are machined from USA extruded 7075 aluminum and mounted on a precision ground 1/2" diameter shaft. The use of this material in conjunction with the shaft provides for an extremely lightweight yet rigid rocker arm.
Rocker arm ratio - 1.2$149.00SKU: rsp_13_031 VIEW ITEM DETAILS -
REV ROCKER - S1 - 1.3 INTAKE 1.2 EXHAUST RATIOThe next generation in Raceseng Rev Rockers! Our new S1 rocker arms are the only true shaft mounted billet aluminum non-roller rocker arms on the market. They feature a arched steel tip which simulates the effect of a roller tip except it does not spin. The rocker geometry is designed to minimize movement on the valve and maintain minimum rocker mass with the industry's lowest moment of inertia.
The S1 Rev Rocker bodies are machined from USA extruded 7075 aluminum and mounted on a precision ground 1/2" diameter shaft. The use of this material in conjunction with the shaft provides for an extremely lightweight yet rigid rocker arm.
Rocker arm ratio - 1.3 intake 1.2 exhaustSKU: rsp_13_033 VIEW ITEM DETAILSOrig. $159.00
Sale $154.00
-
REV ROCKER - S1 - 1.3 RATIOThe next generation in Raceseng Rev Rockers! Our new S1 rocker arms are the only true shaft mounted billet aluminum non-roller rocker arms on the market. They feature a arched steel tip which simulates the effect of a roller tip except it does not spin. The rocker geometry is designed to minimize movement on the valve and maintain minimum rocker mass with the industry's lowest moment of inertia.
The S1 Rev Rocker bodies are machined from USA extruded 7075 aluminum and mounted on a precision ground 1/2" diameter shaft. The use of this material in conjunction with the shaft provides for an extremely lightweight yet rigid rocker arm.
Rocker arm ratio - 1.3$149.00SKU: rsp_13_030 VIEW ITEM DETAILS -
REV ROCKER - S2 - 1.2 RATIOThe latest and greatest in billet roller rockers! The new S2 Rev Rockers are lighter, have a lower mass moment of inertia and feature a custom roller tip pin which is held in by a retaining clip. The S2 rev rockers are the ultimate in balance of mass, stiffness and strength.
$185.00SKU: rsp_13_037 VIEW ITEM DETAILS -
REV ROCKER - S2 - 1.3 RATIOThe latest and greatest in billet roller rockers! The new S2 Rev Rockers are lighter, have a lower mass moment of inertia and feature a custom roller tip pin which is held in by a retaining clip. The S2 rev rockers are the ultimate in balance of mass, stiffness and strength.
$185.00SKU: rsp_13_036 VIEW ITEM DETAILS -
UPRIGHT SHIMPrecision ground and hardened shim to adjust the height of your rev rockers. Required when running longer aftermarket valves. Available in .062" and .093" heights, select your thickness below.
$1.00SKU: rsp_13 shim VIEW ITEM DETAILS
-
Company
-
Assistance
-
Follow
