PUSH RODS

GUIDE PLATE - 1/4" PUSH RODS

Raceseng guide plates are designed and manufactured for precise push rod fit and function. The guide plate accurately and smoothly fills the need for absolute control of side to side push rod movement.

This guide plate should be used with Raceseng S1 push rods. No modification necessary for installation. No guide plate is necessary when using shaft mounted rocker arms.

APPLICATION » 160/200 honda and clone engines with Raceseng S1 push rods

SKU: rsp_13_295

VIEW ITEM DETAILS

GUIDE PLATE - 3/16" PUSH RODS

Raceseng guide plates are designed and manufactured for precise push rod fit and function. The guide plate accurately and smoothly fills the need for absolute control of side to side push rod movement.

This guide plate should be used with 3/16" diameter stock or aftermarket push rods. No modification necessary for installation. No guide plate is necessary when using shaft mounted rocker arms.

APPLICATION » 160/200 honda and clone engines

SKU: rsp_13_294

VIEW ITEM DETAILS

PUSH ROD - ADJUSTABLE - S2

The S2 push rod is the ultimate in strength, weight and versatility. These are stronger then our S1 push rods and adjustable too. You will never need to cut or buy push rods again because these are fully adjustable from 5" to 5.500" (stock length 5.275").

Price per each.

SKU: rsp_13_290

VIEW ITEM DETAILS

PUSH ROD - ADJUSTABLE - S2 - KIT

Complete S2 adjustable push rod kit comes with a set of push rods and the push rod tightening tool.

The S2 push rod is the ultimate in strength, weight and versatility. You will never need to cut or buy push rods again because these are fully adjustable from 5" to 5.500" (stock length 5.275").

SKU: rsp_13_290 kit

VIEW ITEM DETAILS

PUSH ROD - S1

The S1 push rods are the strongest and lightest push rods available on the market for the 160/200 honda and clone engines. The S1 push rod tube is made from 1/4" aerospace grade aluminum and the ball tips (5mm) are precisely cnc machined to perfectly fit in the lifter and rocker arm. The S1 push rods can be used with any rocker arm on the market (stamped steel, billet steel or billet roller rocker arm).

Price per each.

APPLICATION » 160/200 honda and clone engine

SKU: rsp_13_291

VIEW ITEM DETAILS

PUSH ROD - S1 - CUSTOM LENGTH

The S1 push rods are the strongest and lightest push rods available on the market for the 160/200 honda and clone engines. The S1 push rod tube is made from 1/4" aerospace grade aluminum and the ball tips (5mm) are precisely cnc machined to perfectly fit in the lifter and rocker arm. The S1 push rods can be used with any rocker arm on the market (stamped steel, billet steel or billet roller rocker arm).

Specify your push rod length below, measuring from outside of ball tip to outside of ball tip. The length must be anywhere between 5.275" and 5.000". Price per each.

APPLICATION » 160/200 honda and clone engine

SKU: rsp_13_291cl

VIEW ITEM DETAILS

PUSH ROD INSTALL TOOL

The tool that will solve your push rod installation issues. The push rod install tool bolts to your cylinder head and holds the push rods at the right place so you can easily install your rocker arms. Works like a dream and saves a lot of headaches!

This tool works with the 4 and 5 bolt cylinder heads and all makes of rocker arms.

SKU: rsp_13_227

VIEW ITEM DETAILS