-
Coil Gapping Tool
Take the guesswork out of setting your ignition coil gap with this little beauty! Our coil gapping tool will aid you in properly setting your ignition coil gap to precisely .020".
APPLICATION » All flywheels and engines$9.95SKU: rsp_13_061 VIEW ITEM DETAILS -
Push Rod Install Tool
The tool that will solve your push rod installation issues. The push rod install tool bolts to your cylinder head and holds the push rods at the right place so you can easily install your rocker arms. Works like a dream and saves a lot of headaches! This tool works with the 4 and 5 bolt cylinder heads and all makes of rocker arms.
APPLICATION » 160/200/212 Honda GX, Clone and Predator Engines$14.00SKU: rsp_13_227 VIEW ITEM DETAILS -
Stud Installer Tool
The Raceseng stud installer tool is a huge help when installing any of our cylinder head and side cover stud kits. A must have for anyone assembling and building high performance karting engines.
$15.00SKU: rsp_13_458 VIEW ITEM DETAILS -
Rev Wheel Puller
Stop pounding your crank and using screw drivers to get your flywheels off! This slick billet aluminum flywheel puller screws into the front of our Rev Wheel and aids in easily removing the flywheels.
APPLICATION » Works with all 160/200 and 340/390 Rev WheelsSKU: rsp_13_080 VIEW ITEM DETAILSRegular Price: $25.00
Special Price: $20.00
-
Piston Dead Stop
A must have for anyone assembling and building engines. Our billet aluminum piston dead stop can be used with any motor with a 14mm spark plug. The piston dead stop screws into the spark plug hole and aids in finding true top dead center with a degree wheel. It is also an essential tool for torquing and removing a flywheel nut.
$25.00SKU: rsp_13_225 VIEW ITEM DETAILS -
Jet Pac
The Raceseng Jet Pac is a stylish way to keep all of your carburetor jets in one place. The jet pac comes with a card and integrated card holder in the back side so you can note what size jets are in each of the tapped place holders. Holds up to 10 jets.
APPLICATION » 160/200/212/270/340/390 Carburetor Jets$25.00SKU: rsp_13_825 VIEW ITEM DETAILS -
Valve Guide Driver
New genuine OEM Honda valve guide driver. Use this tool to install new guides properly. It is required to use the valve guide reamer (rsp_13_644) to ream the guides for a precise valve fit.
APPLICATION » 160/200 Honda GX and Clone$35.00SKU: rsp_13_643 VIEW ITEM DETAILS -
Piston Ring Compressor - Standard Bore
A must have for anyone building an engine! Our piston ring compressor aids the rookie or seasoned engine builder in properly compressing the piston rings before dropping the piston in the block. This compressor is meant to be used on standard size bores.
APPLICATION » 160/200 Honda GX and Clone Engines$35.00SKU: rsp_13_226 VIEW ITEM DETAILS -
Valve Spring Compressor Tool
WHY ISN'T THERE AN EASIER WAY TO INSTALL VALVE SPRINGS?
Raceseng has definitively answered that question once and for all with its the valve spring compressor tool! Our tool uses only a 10mm wrench and creates a simple hands free way of compressing your valve springs. The tool works with all types of retainers, keepers and valve springs.
APPLICATION » 160/200/212 Honda GX, Clone and Predator Engines$45.00SKU: rsp_13_230 VIEW ITEM DETAILS
