REVWHEEL PULLER
$30.00
In Stock
SKU: rsp_13_080
stop pounding your crank and using screw drivers to get your flywheels off! this slick billet aluminum flywheel puller works with the 160/200 and 340/390 rev wheels.
FEATURES
» billet aluminum flywheel puller body
» works with finned and non finned rev wheel models
» screw pull studs into the threaded holes in the face of the flywheel. make sure studs are bottomed out
» slide flywheel puller bracket onto the pull studs
» place the stainless steel washers and nuts onto the pull studs
» tighten each nut down equally until they contact the flywheel puller bracket
» equally tighten the nuts a 1/2 turn at a time until the flywheel releases from the crank taper
» works with finned and non finned rev wheel models
INSTRUCTIONS
» screw pull studs into the threaded holes in the face of the flywheel. make sure studs are bottomed out
» slide flywheel puller bracket onto the pull studs
» place the stainless steel washers and nuts onto the pull studs
» tighten each nut down equally until they contact the flywheel puller bracket
» equally tighten the nuts a 1/2 turn at a time until the flywheel releases from the crank taper
Customer Reviews
-
Company
-
Assistance
-
Follow
